summaryrefslogtreecommitdiff
path: root/Adam/Patches
diff options
context:
space:
mode:
Diffstat (limited to 'Adam/Patches')
-rw-r--r--Adam/Patches/Mount2CaseAFDC.HC80
-rw-r--r--Adam/Patches/Mount2CaseBFDC.HC22
-rw-r--r--Adam/Patches/Mount2LtrsFDC.HC14
-rw-r--r--Adam/Patches/Mount2VarsFDC.HC10
-rw-r--r--Adam/Patches/Mount2VarsFDC2.HC7
5 files changed, 0 insertions, 133 deletions
diff --git a/Adam/Patches/Mount2CaseAFDC.HC b/Adam/Patches/Mount2CaseAFDC.HC
deleted file mode 100644
index 2e70791..0000000
--- a/Adam/Patches/Mount2CaseAFDC.HC
+++ /dev/null
@@ -1,80 +0,0 @@
-// PATCH: Add the ability to configure floppy BlkDevs (part 1 of 2)
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: #include this file at the end of the first switch statement.
-// ADAM PATCH: Must be installed after kernel patches!
-
-case BDT_FLOPPY:
- do {
- "Include $PURPLE$0x$FG$ prefix.\nI/O Port Base:\n";
- GetS(base0_buf,STR_LEN);
- } while (!Str2I64(base0_buf))
- do {
- "Drv Num:\n";
- unit=GetChar-'0';
- } while (0<=unit<=3)
- "If you have a 3.5-inch high-density (1.44 Meg)\n"
- "floppy disk, there are some default params you can use.\n"
- "Otherwise, you will need to set the manually (Intel's datasheet\n"
- "for the 82077AA is very useful here).\n\n"
- "Use default params ";
- If (YorN) {
- defaults=TRUE;
- } else {
- "The folowing parameters are used to configure the ctrlr:\n"
- "Most can be entered in either decimal or hex, but the head\n"
- "count, sector size, and data rate take single decimal digits.\n"
- do {
- "Cylinders:\n";
- GetS(cyl_buf,STR_LEN);
- } while (!Str2I64(cyl_buf));
- do {
- "Heads:\n";
- heads=GetChar-'0';
- } while (1<=heads<=2);
- do {
- "Sectors:\n";
- GetS(spt_buf,STR_LEN);
- } while (0<=Str2I64(spt_buf)<=255);
- do {
- "Sector Size (128<<X bytes):\n";
- size=GetChar-'0'
- } while (0<=size<=7);
- if (size==0) {
- do {
- "DTL (data length):\n";
- GetS(dtl_buf,STR_LEN);
- } while (1<=Str2I64(dtl_buf)<=128);
- } else {
- dtl_buf="0xFF"; // If sect size is not 128, DTL is set to 255
- }
- do {
- "Step Rate:\n";
- GetS(srt_buf,STR_LEN);
- } while (0<=Str2I64(srt_buf)<=15);
- do {
- "Head Unload Time:\n";
- GetS(hut_buf,STR_LEN);
- } while (0<=Str2I64(hut_buf)<=15);
- do {
- "Head Load Time:\n";
- GetS(hlt_buf,STR_LEN);
- } while (0<=Str2I64(hlt_buf)<=127);
- do {
- "GPL1 (normal GAP3 len):\n";
- GetS(gpl1_buf,STR_LEN);
- } while (1<=Str2I64(gpl1_buf)<=255);
- do {
- "NOTE: Setting GPL2 to 0 will disable low-level fmt!\n";
- "GPL2 (fmt GAP3 len):\n";
- GetS(gpl2_buf,STR_LEN);
- } while (0<=Str2I64(gpl2_buf)<=255);
- do {
- "*** Data Rates ***\n"
- "0=500 Kbit\n"
- "1=300 Kbit\n"
- "2=250 Kbit\n"
- "3=1 Mbit (Not Supported)\n\n";
- "Data Rate:\n";
- bps=GetChar-'0'
- } while (0<=bps<=3);
- } \ No newline at end of file
diff --git a/Adam/Patches/Mount2CaseBFDC.HC b/Adam/Patches/Mount2CaseBFDC.HC
deleted file mode 100644
index 2ffaa2f..0000000
--- a/Adam/Patches/Mount2CaseBFDC.HC
+++ /dev/null
@@ -1,22 +0,0 @@
-// PATCH: Add the ability to configure floppy BlkDevs (part 2 of 2)
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: #include this file at the end of the second switch statement.
-// ADAM PATCH: Must be installed after kernel patches!
-
-case BDT_FLOPPY:
- if (defaults) {
- // These assume a 1.44 Meg, 3.5-inch floppy
- DocPrint("bd->base0=%s;",base0_buf);
- DocPrint("bd->blk_size=128<<%d;",2);
- DocPrint("bd->cyls=%s;bd->heads=%d;bd->spt=%s;","80",2,"18");
- DocPrint("bd->srt=%s;bd->hut=%s;bd->hlt=%s;","13","5","0");
- DocPrint("bd->bps=%d;bd->gpl1=%s;bd->gpl2=%s",0,"27","124");
- DocPrint("bd->dtl=%s","255");
- } else {
- DocPrint("bd->base0=%s;",base0_buf);
- DocPrint("bd->blk_size=128<<%d;",size);
- DocPrint("bd->cyls=%s;bd->heads=%d;bd->spt=%s;",cyl_buf,heads,spt_buf);
- DocPrint("bd->srt=%s;bd->hut=%s;bd->hlt=%s;",srt_buf,hut_buf,hlt_buf);
- DocPrint("bd->bps=%d;bd->gpl1=%s;bd->gpl2=%s",bps,gpl1_buf,gpl2_buf);
- DocPrint("bd->dtl=%s",dtl_buf);
- } \ No newline at end of file
diff --git a/Adam/Patches/Mount2LtrsFDC.HC b/Adam/Patches/Mount2LtrsFDC.HC
deleted file mode 100644
index 5325350..0000000
--- a/Adam/Patches/Mount2LtrsFDC.HC
+++ /dev/null
@@ -1,14 +0,0 @@
-// PATCH: Update ltr lst to reflect remapping of drv ltrs
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: Comment out the original Print call.
-// THEN: #include this file after it.
-// ADAM PATCH: Must be installed after kernel patches!
-
-"\n****** Mount Drives ******\n"
- "$GREEN$A$FG$-$GREEN$B$FG$ are RAM drives.\n"
- "$GREEN$C$FG$-$GREEN$L$FG$ are ATA hard drives.\n"
- "$GREEN$M$FG$-$GREEN$P$FG$ are ISO file read drives.\n"
- "$GREEN$Q$FG$-$GREEN$S$FG$ are ISO file write drives.\n"
- "$GREEN$T$FG$-$GREEN$V$FG$ are ATAPI CD/DVD drives.\n"
- "$GREEN$W$FG$-$GREEN$Z$FG$ are floppy drives.\n"
- "\nDrive Letter ($PURPLE$<ENTER>$FG$ to exit):"; \ No newline at end of file
diff --git a/Adam/Patches/Mount2VarsFDC.HC b/Adam/Patches/Mount2VarsFDC.HC
deleted file mode 100644
index d6e4a0e..0000000
--- a/Adam/Patches/Mount2VarsFDC.HC
+++ /dev/null
@@ -1,10 +0,0 @@
-// PATCH: Add more U8 bufs for floppy configuration
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: Comment out the original declaration.
-// THEN: #include this file after it.
-// ADAM PATCH: Must be installed after kernel patches!
-
-U8 blks_buf[STR_LEN],addr_buf[STR_LEN],base0_buf[STR_LEN],base1_buf[STR_LEN],
- cyl_buf[STR_LEN],heads,spt_buf[STR_LEN],size,srt_buf[STR_LEN],
- hut_buf[STR_LEN],hlt_buf[STR_LEN],bps,gpl1_buf[STR_LEN],
- gpl2_buf[STR_LEN],dtl_buf[STR_LEN]*filename=NULL,*filename2=NULL,res=0; \ No newline at end of file
diff --git a/Adam/Patches/Mount2VarsFDC2.HC b/Adam/Patches/Mount2VarsFDC2.HC
deleted file mode 100644
index d148a83..0000000
--- a/Adam/Patches/Mount2VarsFDC2.HC
+++ /dev/null
@@ -1,7 +0,0 @@
-// PATCH: Add two new Bools for floppy configuration
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: Comment out the old Bool declaration.
-// THEN: #include this file after it.
-// ADAM PATCH: Must be installed after kernel patches!
-
-Bool whole_drv,make_free,defaults=FALSE; \ No newline at end of file
generated by cgit v1.2.3 (git 2.46.0) at 2026-06-27 06:34:43 +0000