| Age | Commit message (Collapse) | Author |
|---|
|
|
|
KFloppyB was updated to reflect the return type changes to FDCRBlks and FDCWBlks.
|
|
|
|
I fixed some indentation in this header file and added definitions for the check codes used by FDCChk.
|
|
The filesystem-checking code, now part of the FDCFsChk function, was replaced with a call to said function.
|
|
This new function is an export of the filesystem-checking code in BlkDevAddFDC.HC. This was done to allow it to be used by DskChg, allowing filesystem autodetection when disks are swapped.
|
|
FDCChk now turns the motor on and off, and tests for the presence of a disk by performing two seeks and checking the disk change flag.
|
|
FDCReadId was patched to use 64-bit variables, and to remove asterisks from references to the CBlkDev pointer, bd.
|
|
FDCWriteBlks was patched for the same reasons as FDCReadBlks (64-bit variables, motor control, fix typo in head calculation, unlock at end), as well as fixing a bug where only [cnt] bytes were being copied into the DMA buffer instead of [cnt] sectors.
|
|
FDCReadBlks was patched to use 64-bit variables, turn the motor on and off, use the correct variable for the head count, and unlock the block device before returning.
|
|
FDCRBlks and FDCWBlks were patched to use 64-bit variables, and remove unecessary parentheses.
|
|
FDCReadData and FDCWriteData were patched to use 64-bit variables, and to send the read/write commands in the correct format.
|
|
FDCInit was patched to use 64-bit variables, and to turn the motor on when performing the recalibration step.
|
|
FDCSelDrv was patched to preserve the other DOR bits, and not reset the controller when selecting a drive, which caused I/O timeouts.
|
|
FDCMotorTask was patched to use 64-bit variables, preserve DOR contents when setting the motor bits, and properly set the block device's motor state. FDCMotor now properly checks the current motor status before writing to the DOR or spawning the power-off task, and also preserves the DOR bits.
|
|
I have patched FDCReset to actually do its job correctly, switching it over to DOR-twiddling instead of the DSR method. I also allowed it to skip the interrupt checks if it gets a 0x80 byte back at any point.
|
|
FDCReadByte and FDCSendByte have been updated to store the MSR contents into a separate variable for readability. They also now Yield; when polling to prevent the OS from feezing.
|
|
The chanagelog has been updated to reflect the new policy on commit signing.
|
|
The changelog has been updated to reflect the changes made to the blkdev branch as of June 22, 2026, at 02:19 CDT.
|
|
Since KInts.HC is compiled before DskFDC.HC, undefined symbol issues could possibly occur. when attempting to compile the interrupt set-up code because the IRQ handler is not yet compiled. To prevent this, I separated the IRQ handler into another file that is included immediately after the headers. The instructions have been updated to reflect this change.
|
|
|
|
|
|
Some of the patches are applied to files in subdirectories of ::/Kernel and ::/Adam. The directory tree has been re-arranged in such a way as to allow them to be #included without having the compiler backtrack to their parent directory.
|
|
I updated the installer program to copy over the Adam directory, and also removed the old patch instructions.
|
|
I updated the changelog to reflect the changes made to the blkdev branch as of June 19, 2026, at 21:32 CDT.
|
|
I updated my instruction generator script to show the parent paths of each file, and also added support for the ADAM PATCH tag.
|
|
I forgot to stage the change I made to this file's code tags. Whoops.
|
|
To alert the user to the need to apply the patches made to Adam after the kernel patches, I have added a special "ADAM PATCH" tag.
|
|
I have updated the readme to reflect the major changes to the driver code.
|
|
This new file contains a condensed list of all code files in the repository, with information on what they do, and (if applicable) instructions for use or installation.
|
|
I fixed the punctuation on some of the info tags, and added a few more THEN tags where they were needed.
|
|
I had updated several more files after staging the previous ones, but forgot to stage these files as well. Thus, I had to commit these separately.
|
|
I have added the "PURPOSE", "TO USE", and "THEN" tags to make the information sections more easy to read while keeping line length down. These are used by a Python script I wrote to generate an instruction file.
|
|
KFloppyB2.HH has now replaced KFloppyB.HH, and has been renamed accordingly.
|
|
The time has finally come for the old code to be removed from the source tree.
|
|
As a result of a "brain fart," I erroneously added install instructions to the old version of KernelB.HH; KernelB2.HH already had install instructions.
|
|
I realized that KFloppyA would have to be included before KInts is, so that the IRQ definition can be used by IntInit2. The install instructions have been updated accordingly. Installation instructions were also added to KernelB.
|
|
The IRQ handlers in TempleOS' kernel code have an "IRQ_" prefix. FDCInt has been renamed to IRQ_FDC in keeping with Terry's code style. An unused definition of the same name has also been removed from KFloppyA.HH.
|
|
The register offsets apply to all floppy controllers, and not just the first. The comment I had there has been updated to reflect this.
|
|
The changelog has been updated to reflect the changes made to the 'blkdev' branch as of June 12, 2026, 20:33 CDT. A typo was also fixed.
|
|
I added comments to all patch files explaining their function and how to install them. Installation instructions were also added to some of the code files as well.
|
|
Since this file is effectively a patch to KStart32, it makes sense to keep it in the Patches subdirectory.
|
|
I added headers for the "read ID" and disk check functions, and added the proper types.
|
|
|
|
|
|
Since the U8 and Bool declarations in Mount2 are not on consecutive lines, I decided to split them for ease of patching.
|
|
The changelog has been updated to reflect the changes made to the 'blkdev' branch between June 4 and June 10, 2026, 20:23 CDT.
|
|
Mount2Ltrs was created without the normal "FDC" suffix, which I have now added.
|
|
This file modifies the list of drive letter types printed by Mount2 to reflect the changes made by Let2BlkDevTypeFDC.HC. All lines of the original Print call are to be commented out and this file included in its place.
|
|
This file patches Let2BlkDevType to provide drive letters for floppy drives. The original function is to be commented out and this file included in its place.
|
