From edd15150f34b040d5ab68a1b418705c0de895a1e Mon Sep 17 00:00:00 2001
From: Harley Travis <harleytravis123@outlook.com>
Date: Sat, 20 Jun 2026 20:00:32 -0500
Subject: Re-arrange patch files

Some of the patches are applied to files in subdirectories of ::/Kernel and ::/Adam. The directory tree has been re-arranged in such a way as to allow them to be #included without having the compiler backtrack to their parent directory.
---
 Adam/Patches/Mount2CaseAFDC.HC | 80 ------------------------------------------
 1 file changed, 80 deletions(-)
 delete mode 100644 Adam/Patches/Mount2CaseAFDC.HC

(limited to 'Adam/Patches/Mount2CaseAFDC.HC')

diff --git a/Adam/Patches/Mount2CaseAFDC.HC b/Adam/Patches/Mount2CaseAFDC.HC
deleted file mode 100644
index 2e70791..0000000
--- a/Adam/Patches/Mount2CaseAFDC.HC
+++ /dev/null
@@ -1,80 +0,0 @@
-// PATCH: Add the ability to configure floppy BlkDevs (part 1 of 2)
-// FILE: ::/Adam/ABlkDev/Mount.HC
-// TO INSTALL: #include this file at the end of the first switch statement.
-// ADAM PATCH: Must be installed after kernel patches!
-
-case BDT_FLOPPY:
-  do {
-    "Include $PURPLE$0x$FG$ prefix.\nI/O Port Base:\n";
-    GetS(base0_buf,STR_LEN);
-  } while (!Str2I64(base0_buf))
-  do {
-    "Drv Num:\n";
-    unit=GetChar-'0';
-  } while (0<=unit<=3)
-  "If you have a 3.5-inch high-density (1.44 Meg)\n"
-    "floppy disk, there are some default params you can use.\n"
-    "Otherwise, you will need to set the manually (Intel's datasheet\n"
-    "for the 82077AA is very useful here).\n\n"
-    "Use default params ";
-    If (YorN) {
-      defaults=TRUE;
-    } else {
-      "The folowing parameters are used to configure the ctrlr:\n"
-	"Most can be entered in either decimal or hex, but the head\n"
-	"count, sector size, and data rate take single decimal digits.\n"
-      do {
-	"Cylinders:\n";
-	GetS(cyl_buf,STR_LEN);
-      } while (!Str2I64(cyl_buf));
-      do {
-	"Heads:\n";
-	heads=GetChar-'0';
-      } while (1<=heads<=2);
-      do {
-	"Sectors:\n";
-	GetS(spt_buf,STR_LEN);
-      } while (0<=Str2I64(spt_buf)<=255);
-      do {
-	"Sector Size (128<<X bytes):\n";
-	size=GetChar-'0'
-      } while (0<=size<=7);
-      if (size==0) {
-	do {
-	  "DTL (data length):\n";
-	  GetS(dtl_buf,STR_LEN);
-        } while (1<=Str2I64(dtl_buf)<=128);
-      } else {
-	dtl_buf="0xFF"; // If sect size is not 128, DTL is set to 255
-      }
-      do {
-	"Step Rate:\n";
-	GetS(srt_buf,STR_LEN);
-      } while (0<=Str2I64(srt_buf)<=15);
-      do {
-	"Head Unload Time:\n";
-	GetS(hut_buf,STR_LEN);
-      } while (0<=Str2I64(hut_buf)<=15);
-      do {
-	"Head Load Time:\n";
-	GetS(hlt_buf,STR_LEN);
-      } while (0<=Str2I64(hlt_buf)<=127);
-      do {
-	"GPL1 (normal GAP3 len):\n";
-	GetS(gpl1_buf,STR_LEN);
-      } while (1<=Str2I64(gpl1_buf)<=255);
-      do {
-	"NOTE: Setting GPL2 to 0 will disable low-level fmt!\n";
-	"GPL2 (fmt GAP3 len):\n";
-	GetS(gpl2_buf,STR_LEN);
-      } while (0<=Str2I64(gpl2_buf)<=255);
-      do {
-	"*** Data Rates ***\n"
-	  "0=500 Kbit\n"
-	  "1=300 Kbit\n"
-	  "2=250 Kbit\n"
-	  "3=1 Mbit (Not Supported)\n\n";
-	"Data Rate:\n";
-	bps=GetChar-'0'
-      } while (0<=bps<=3);
-    }
\ No newline at end of file
-- 
cgit v1.2.3